Shower nozzle clogging Cleaning Tips
Use lubricant: if the metal rust of the shower head causes serious blockage, then use WD-40 rust removal and anti rust lubricant. This rust removal lubricant has excellent affinity and permeability with metals. The rust layer can be separated from the metal layer. Make the rusty part and metal contact surface, and leave a protective film. Let the shower never die of rust. If your shower is not made of stainless steel, this method may be used.
Soak with vinegar: if your shower head has been blocked for a long time, and a large number of holes are blocked. So it's not obvious to use a needle to pierce one by one. In this case, it is recommended that you use acidizing dust removal method to solve the problem of shower clogging. You need to prepare some white vinegar. Pour the vinegar into the basin so that the flower head can be immersed. About ten minutes after soaking in vinegar, you can remove the scale in the shower head.
With Acupuncture: if your home's shower is part of the small hole blocked, then first let water, see which holes are blocked. Then you have to turn on the shower head and see that there are many small holes in the shower head like the shower head. This is where the water comes out. Then we will first prepare a needle, and then use the needle to prick the impurities in the hole until there is no impurity in the hole. This method is the most direct, but be careful to prick the spray hole.
What to do if the shower head is blocked
After a long period of use, the shower head will be blocked, which is very natural. It does not mean that the shower head is broken. Don't worry. You don't need to buy a new one. If there is scale after long-term drainage, you only need to dismantle and clean the shower head.
Many people may find it troublesome to dismantle and clean them. In fact, the operation is very simple. It doesn't require you to dismantle the shower head into pieces. The most important thing is to let you clean the shower head.
The main raw material for cleaning shower head is white vinegar, which is also a kind of material for family. After removing the shower head, we put it into a small basin containing white vinegar and soak it for about two hours. After soaking, brush it with a toothbrush, and then clean it with water. If there is hard water sediment, scrub it with lemon slices.
Special attention should be paid to the use of strong acid (white vinegar is preferred) to avoid corrosion on the surface of shower. To ensure that the nozzle is not blocked, we should clean the shower nozzle every half a year or less, so that you can no longer worry about the sudden plugging of the shower nozzle, which will affect your bathing mood.
In order to ensure the service life of the shower head, we'd better not install it directly under the Yuba, and the distance should be more than 60cm. We often use a soft cloth to wipe the surface of the shower head to make it as new as before.
